Gadget Serial (COM6) Driver Download

This article will guide you how to correctly install VAG-COM 409.1 KKL USB cable on Windows and VCDS software.

CAUTION Using VAG-COM 409.1 KKL:

In our experience, we don't recommend depending on VAG-COM 409.1. Because it's functionality is extremely limited. In addition — you'll need to pay extra $97 to upgrade free VCDS-Lite software to full version. And even if you do upgrade — it can only scan vehicles made up to year 2004.

For that reason we recommend to get the complete VAG-COM 2020 cable with original, unlocked and full version of VCDS software from Ross-Tech™ — by clicking here.

Gadget Serial (com6) Driver Download Windows 10

SerialComm Downloads, Drivers, and Free Software Tools. Quality Guarantee - SerialComm converters are low priced, high quality products and made to last a lifetime. They are manufactured in a ISO-9001 certified facility using surface mount technology with lead free components. It allow to inhibit the auto-update for a particular program or driver (Prolific in our case). For more informations and where to download this tool, take a look at this article: KB3073930. I have tested it and it work fine. The only problem with it, is that, it reload the latest driver when you plug the device on a never used USB port. Downloads; Support; Wish List (0). 128x64 SH1106 Driver. $9.99 Add to Cart. ESC VESC® BLDC Open-Source Electric Skateboard ESC (Fully Assembled). SPI, I2C, Serial) $29.99 Add to Cart. TIAO Smart Network Sprinkler Controller - 16 Station Sprinkler Controller (open source desktop/mobile App) $89.99. Gigaware USB to Serial Driver, 6.4 out of 10 based on 81 ratings Incoming Search Terms: Related Posts Radioshack Gigaware Usb Serial Driver. Prolific USB to Serial Driver (1.000) Aten USB to Serial Driver (1.000) Bafo USB to Serial Driver (1.000) Prolific USB to Serial Comm Port Driver (1.000) USB-Serial Port adapter (RS-232) in Ubuntu Linux (1.

Hi, Due to limited condition, we can’t reproduce your scenario to test, therefore, what I can think of is provide an idea for you. As you said, user needs a admin permission to open Device Manager to configure settings, I think you can try Computer Start Scripts to make it.

STEP 1: Download and Install VAG-COM KKL 409.1 Drivers

(DO NOT connect cable to your computer yet. Only do this when you're instructed below.)

Start by downloading the VAG-COM Driver Pack 1.

Here's how to install on different Windows versions...

Windows Vista, 7, 8, 8.1, 10:

Uncompress the file. Double-click on 'Install.exe' to install the drivers. When complete — plug in cable into any USB port on your computer and wait for automatic installation to complete.

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Windows XP:

Uncompress the file. Double-click on 'Install.exe' to install the drivers.
Plug cable into any computer's USB port.
'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?'. Select 'Yes'.
Select 'Install the software automatically'.
After the installation is complete, click 'Finish'.
'Found New Hardware Wizard' will start once again because there are two drivers for this cable.
Go through the same steps as explained above to install this second driver.

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Troubleshooting: If Drivers Failed To Install:

Installation failed? Download here VAG-COM Driver Pack 2.

Unextract the file into any folder. Then while your cable is connected to the computer — go Device Manager.

Windows Vista/7/8/10: Control Panel » System » Device Manager
Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

You'll see a device similar to 'USB Serial Port' under either 'Other devices' or 'Ports (COM & LPT)'.

Right-click and choose 'Update Driver Software'. Like this:

Then select the location where you unextracted Driver Pack 2. Let it install.

STEP 2: Discover Port Number that VAG-COM KKL Cable is Using

Go to Control Panel.

Windows Vista/7/8/10: Control Panel » System » Device Manager
Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'.

Next to 'USB Serial Port' — you'll see a number.

If the COM port number is between 1-4, then everything is fine. Move onto Step 3.

If the COM port number is above 4, then we'll have to change it so it's between 1-4. Here's how...

Right-click on 'USB Serial Port' and click on 'Properties' — as per below pic:

Then:

Click: Port Settings
Click: Advanced
For 'COM Port Number' — you MUST choose any number between 1-4.

That's it! Now let's test if everything is working. Move onto next step below...

Cable should be plugged into computer.

Start VCDS-Lite software.
Click 'Options' button.
You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2.
Click the ‘Test’ button.
If everything is good, it should display 'Interface Status: Found!'.
You can now connect other end of cable to car. Turn on ignition. And you're ready to start diagnosing!

If test is not successful — check the following:

Gadget serial (com6) driver download windows 7

Other software or devices using USB ports or that same COM Port could be conflicting. You should uninstall the suspected software or device for troubleshooting this problem.
It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System.
Cable must be plugged into the vehicle with ignition ON.
Test the cable with each COM Port from 1 to 4 in Windows Device Manager.
Make sure that the driver is installed and configured as explained in Step 1.

More Troubleshooting Tips:

Only Audi, Volkswagen, Skoda and Seat vehicles are supported. Other brands will only work for generic OBD-II functions.
If VAG-COM 409.1 KKL cable doesn't connect — or if you get the error message 'Can't Synch Baud Rate' — then go to Options and set Start Baud to 9600. If 9600 doesn't work, try 4800 and 1200. Turn the vehicle's ignition OFF and back ON after each failed attempt to connect.
If you have installed VCDS software before or from another source, uninstall all versions of VCDS software right now, and delete directory 'C:Ross-Tech'. Then install latest version of VCDS-Lite software by clicking here.

For further information and instructions for troubleshooting, visit the following links:

How to Install & Register VCDS-Lite software That Came With Your VAG-COM 409.1 KKL Cable

≡ PagesFavoritedFavorite1

FTDI Driver Installation

Development boards such as the SparkFun RedBoard for Arduino and the Arduino Uno require special drivers or code that tells the computer how to interact with them. This guide is here to help you get this driver software installed as quickly as possible so you can get back to building circuits and learning about electronics!

These instructions apply to both the Arduino Uno, the Arduino Uno SMD, and the SparkFun RedBoard for Arduino.

Note: You should only have to complete this process one time. Once the correct drivers are installed, your board will be recognized by your computer every time you plug it in afterwards.

Note for Educators: You will most likely need to obtain administrative privileges from your network or IT administrator in order to install these drivers.

Scroll down to the corresponding section for whichever operating system (OS) you are using.

Windows

Plug the board into your computer. Windows will likely complain about the device not having the correct driver. It may attempt to find it. If you have never plugged in a similar device to your computer, it probably won't find a driver to use. Luckily, when you downloaded the Arduino IDE, it also came with all the necessary drivers.

To install the correct driver, open the Device Manger. This can be found be searching for 'device manager' in the start menu. Once Device Manager is open, you should see a device with a tiny yellow triangle and exclamation mark next to it.

If you plugged in a SparkFun RedBoard, it will look like the image on the left. Plugging in an Arduino Uno will result in the image on the right.

Right-click on the unknown device, and select Properties.

In the properties window, select Driver Details.

Select the Browse my computer for driver software option.

Navigate to the destination where you installed the Arduino IDE. On Windows, this will most likely be in your Program Files folder. Navigate to the drivers folder found inside the main Arduino folder. You can select the entire folder or the specific driver. needed Your path should look something like this but may vary:

Once the driver installation is complete, you should see the device reappear in the Device Manager window as a usable COM port. The number will vary depending on how many devices you have plugged into your computer. The RedBoard will appear as a USB Serial Port, as shown in the left image. The Uno will appear as an Arduino Uno, as shown in the right image.

In the Arduino IDE, you should see that same serial port available under Tools -> Port.

If you are experiencing problems, please see our in-depth instructions.

MacOS

Plug the board into your computer. Once plugged in, the operating system should recognize it as the appropriate device. In the Arduino IDE, click Tool -> Ports to ensure the device has been recognized. The SparkFun RedBoard will appear a cu.usbserial-XXXXXX device.

The Arduino Uno will appear as a cu.usbmodemXXXXXX device.

If you do not see an available serial port in the Arduino IDE after plugging in your board and waiting a moment, then you may need to install the drivers by hand. To do so, please see our in-depth instructions.

Linux

The Arduino Uno will appear as a ttyACMXX device.